We do have wheel chock for motorcycles. The Flint Hill Goods Adjustable Wheel Chock # FHG37ZR will cradle the tire to help hold the bike in place while you attach the straps. If you have e-track in your trailer the CargoSmart Motorcycle Wheel Chock # 3481731 will snap into the track allowing you to easily remove it when not needed. The Tow-Rax Removable Wheel Chock w/ Wood Screws # TWSPWC is a more basic chock. It includes mounting screws for securing to wood floors used on several utility... view full answer...
The MaxxTow Adjustable Wheel Chock (DISCONTINUED) MT70075 is not removable but we do have motorcycle/dirt bike wheel chocks that are removable.
The Tow-Rax Removable Wheel Chock # TWSPWM in Black or # TWSPWC in Chrome is removable and can accommodate tires that are up to 6-1/2" wide. These come with wood screws but if you have a metal floor then you can use the mounting hardware # TWSPWFKM.
All of our adjustable wheel chocks are meant to be mounted permanently so if you are really wanting... view full answer...
Erickson offers only one size of E-Track wheel chock which measures 8-1/2 long x 6-3/8 wide x 4-1/2 tall. This is offered as a single chock under part # EM09162 and as a pair under part # EM09162-2.
Erickson does offer a wheel chock and tie-down kit for ATVs, part # EM09160, which uses bolt-on chocks that attach directly to a trailer's deck (not to E-Tracks). With your finished floor setup this might be a better option. view full answer...
I may have a solution for you, but I don't believe there is going to be a wheel stabilizer/chock we have available that's going to work for tires that are 1-1/4" apart. You may want to have a look at the Fastway ONEstep Wheel Chocks for Tandem-Axle Trailers and RVs - 16" to 24" Long - Qty 2 # FA84-00-4840, which would require that you have a minimum of 16" between the points where your two wheels contact the ground.
If you can't make that work, your best bet is going to be using a standard... view full answer...
We have both of the parts you are looking for. Part # UF21-001095 for the pair of the Ultra Fab XL Super Grip Chocks and part # UF21-001094 for the single chock. view full answer...
What you describe sounds like the Blaylock EZ Jack and Wheel Chock # EZ-JACK which works for tandem-axle trailers. This item works as both a device for changing tires as well as a wheel chock. Please refer to the linked video for more on this item. view full answer...
The motorcycle wheel chocks we offer, such as the # TWSPWFKM are compatible with tires up to 6-1/2 inches wide, so they wouldn't be a good alternative for your ATV.
We do have some alternatives that could work well for you though. The # PK-WTD from Pack'Em includes 2 chocks, the strap and mounting hardware. The chocks are permanently mounted, but they only sit about 1-5/8 inches off the floor, so they won't get in the way.
Using E-Track like part # E19148 for a 5 foot length, # EM59150... view full answer...
It is not possible to say if your Goldwing with brake covers will fit, since the part that comes close to the disc is at an angle. You would have to physically test it.. I have seen pictures of similar Harleys and the tube runs very close to the rotor.
The Rack'Em Manufacturing Removable Wheel Chock # RA-17 does not have a weight capacity or a bike size limit. It is dependent on how it is mounted. For example if secured to a metal or solid wood floor using the proper fasteners for that... view full answer...
We do offer both the Andersen Rapid Jack # AM3620 and the Andersen Camper Wheel Chock and Leveler system # AM3604. The leveler includes both the Rapid Jack and the Tuff Chock # 3605 in one kit. view full answer...
The range of tire width motorcycle wheel chocks we offer ranges are up to 6-1/2 inches like the part # TWSPWC3BT.
I attached review videos for both chocks for you to check out as well. view full answer...
We do offer a 2-piece set of Ultra-Fab Chock and Lock Wheel Stabilizers for Tandem-Axle Trailers, part # UF21-001070, that works with wheel spacing between 1-1/2- and 5-1/4-inches. If you wish to lock them you can use lock kit # 141T from Master Lock. view full answer...
It is possible to get extra keys/replacement keys for the Trimax Trailer Wheel Chock and Lock # TMX72ZR. However, you will have to get the number off of the key once you receive them and submit it to the manufacturer separately. This will come with 4 keys for your keyed-alike chock locks. view full answer...
The Trimax Trailer Wheel Chock and Lock # TMX75FR and # TMX62ZR that we currently offer only come keyed unique with no way to choose the key code. view full answer...
The CargoSmart Wheel Chock # 3481731 is only currently offered in a size which fits most front motorcycle tires. You might consider using something like the 3 Bike Floor Stand # S64018 if you are transporting multiple bikes. You could adapt it to fit into the E-Track by welding the rack to some Fittings # e59HR. view full answer...
You can use the FloTool Wheel Chock and Jack Stand # FT11933MI to help distribute the weight load from the trailer jack wheel when it is on soft ground. The center square area has a 4 x 3-5/8-inch opening where your jack wheel can rest and the stand's overall dimensions of 17-1/2 x 6-1/4 will provide a broad stable platform to evenly distribute the trailer tongue weight. view full answer...
If your transport is a one-time or occasional event you might consider a pair of basic rubber chocks like the # 337WC8127 for stabilization along with a cable lock to secure the vehicle by its axle. We offer the Master Lock Quantum Self-Coiling, Combination Cable Lock - 1/2" Diameter x 6' Long # 8122D that is 6-feet by 1-3/16-inches thick. This could wrap around an axle and be secured to a simple bolt on D-ring like # LRB1 (hardware is not included). This arrangement would allow the cable... view full answer...
The Hopkins RV Leveling Kit with Electronic LED Smart Level, # HM0820K that you linked to, is an entire kit that includes 1 Smart Level device. This can be combined with the Hopkins Leveling Kit w/ Wheel Chock, # HM08200 to increase your available ramps. view full answer...
For this you will want the Extreme Off-Road Ratcheting Trailer Jack w/ Wheel # ORJW1SU. It has the same 770lb weight capacity as the Jack # ORJW350D that you found but the ratcheting jack allows you to lock the wheel in place. You will be able to free wheel with the jack as well as use the included handle to maneuver the trailer forwards or backwards into areas that you may not be able to move it. view full answer...
B&W makes their Biker Bar motorcycle transport systems, such as # BWMC2301, just for hogs but we do have other setups for cruiser and touring motorcycle transport that are general-purpose products. You can see all of these wheel shock products on the page that I linked for you.
In my opinion the best option is the Tow-Rax Removable Wheel Chock # TWSPWM which fits with front wheel tires up to 6-1/2-inches wide.
I linked for you review video for this item as well as a customer photo showing... view full answer...
Go To Results